|
:: IMI - 3110: MASSAGE cum TREATMENT TABLE (Wooden)
|
 |
Deluxe Massage cum Treatment Table with storage facility & upholstered well padded top,is provided with adjustable backrest which can be adjusted in height for desired position. Top is mounted on sturdily built, solid hardwood frame and legs with natural wood-polish finish.
SPECIFICATIONS:
* Top. :205cm x 71cm x 82cm high, well padded top is divided in two sections.
* Backrest. : 70cm long, with breathing hole & can be continuously adjustable in height.
* Storage. : One Writing board, One Drawer with small cupboard is provided underneath the top for storage.
[Request Quotation / More info...]  |
|
:: IMI - 3111: EXAMINATION COUCH (Wooden) 
|
 |
Foam rubber padded top, size 72" x 24", upholstered
with rexine & had adjustable back rest of 18" length
which can be adjusted in height for desired position.
Two drawers and one writting board is provided underneath the top.
Top is mounted on strudily built well polished hardwood legs. Total height 31".
[Request Quotation / More info...] |
|
:: IMI - 3113: EXAMINATION/TREATMENT COUCH (Metal)
|
 |
Basic treatment cum examination table with vinyl upholstered Two-section well padded top, size 180cm x 60cm with a fixed working height of 80cm. Backrest is 67cm long and is easily adjustable for desired position. Top is fitted on painted heavy duty rectangular steel pipe frame and mounted on four, chrome plated, 37mm dia. tubular legs for stability.
[Request Quotation / More info...] |
|
:: IMI - 3115: HIGH-LOW TREATMENT TABLE (Electrical)
|
|
Electric, variable height, three section table is
suitable for all treatments,including manipulation
Both ends elevats so that the back or legs can be
raised without turning the patient. One end also
lower -20 deg. for some postural drainage & manipulation techniques and more comfortable sitting.
The foam padded top is 195 cm long and 70 cm wide.
Table height is adjustable from 50 cm to 90 cm.
Frame-work in light blue oven baked finished.
[Request Quotation / More info...] |
|
:: IMI - 3118: HI-LOW MAT PLATFORM (Floor)
|
| |
This HI-LOW Mat-Platform is ideal for range of
motion, transfer, strength building and other
active therapies. Platform with height adjustment
and adjustable backrest makes delivering therapy
easier on the therapist.
[Request Quotation / More info...] |
SPECIFICATIONS:
*Frame-Work: Square tube constructed, with
wide base and finished oven
baked enamel.
*Height Adjustment: Electrically Adjustable with a Hand swicth from 51cm to 95cm.
*Mat Platform: Foam padded, with adjustable Back-rest, Size 120cm x 210cm.
*Motor System: Imported with vibration free movement. Weight capacity 120 kgs.
*Power: 220 V AC. |
|
:: IMI - 3120: TILT TABLE (Manual)
|
 |
Manually operated Tilt Table comes with
Three wide straps to hold the patient.
Works to standing position manually with
worm gear arrangement. Range of tilt is
calibrated from 0-90 deg.
The uphosltered table top is 61cm wide
x 195cm long x 80cm high and is fitted
on heavy duty 35mm square steel tube legs.
Mounted on four lockable 10cm dia.
wheels for mobility. Table comes complete
with an Utility Tray & Two Gripping Handles
for A.D.L. activities.
Frame
beautifully finshed in oven baked light blue shade.
[Request Quotation / More info...] |
|
:: IMI - 3121: TILT TABLE (Electric operated)
|
|
Electrically operated Tilt Table with foam padded
top, provided with three straps to hold the
patient. Heavy duty motor provides silent and
smooth lifting action with push button control
switches. Range of tilt is calibrated from 0 - 90
degrees.
The table top is 61cm wide x 195cm long x
80cm high, and is fitted on a heavy duty tubular
steel frame with four locking wheels of 10 cm dia.
for easy mobility. Table comes complete with an
Utility Tray and gripping handle for ADL activity.
Full 90 degree of tilt plus negative facility also
Steel frame oven baked finish.
Works on 220 V AC.
[Request Quotation / More info...] |
|
|
:: IMI - 3121A: TILT TABLE CHILD (Manual with Activity Tray)
|
 |
Manually operated Tilt Table comes with Three wide straps to hold the patient. Works to standing position manually with worm gear arrangement. Range of tilt is calibrated from 0-90 deg. The uphosltered table top is 61cm wide x195cm long x 80cm high, is fitted on heavy duty 35mm square steel tube legs. Mounted on four lockable 10cm dia. wheels for mobility. Table comes complete with an Utility Tray & One Gripping frame for A.D.L. activities. Frame beautifully finshed in oven baked light blue shade.
[Request Quotation / More info...] |
|
:: IMI - 3125: ACTIVITY MATTRESS
|
 |
All purpose lightweight mat of high density foam,
protects body during exercises. The floor mat size
120cm x 190cm x 10cm is covered with nylon cloth &
sewn with superior strength nylon thread. Loops on
sides are provided for hanging on wall.
Excellent for aerobics and light exercises.
[Request Quotation / More info...] |
|
:: IMI - 3141: VARUN CONTINUOUS PASSIVE MOTION UNIT (L/E)
|
 
Table is not the part of the unit |
The CPM is designed for lower extremities (Knee &
Hip), to stimulate the healing of cartilage in addition to the reduction of post operative swelling and pain. The solid state circuitry control panel
with highly visual LED Digital readouts allows
Flexing and Extending a joint through a pre-fixed
range of motion and time.
Proper fit of Calf and
Thigh lengths are easily achieved. The necessary
limb support provides a comfortable surface for
prolonged contact and are washable in cold water.
The light weight unit is constructed of Aluminium
Sheet and is fitted with carrying Handle and Bed
fixing clamps.
[Request Quotation / More info...]
|
SPECIFICATIONS:
*Flexion Angle: Digital display of Flextion & Extension Angles. 0 to 108 deg.
*Timer: Digital Timer upto 99 minuts.
*Angle Adjustment: Two Inching knobs to adjust starting angle.
*Speed: Fixed single speed.
*Right or Left Leg can be exercised by little adjustments.
*Patient Safety: Patient safety switch provided. |
|
:: IMI - 3142: PANKAJ CONTINUOUS PASSIVE MOTION UNIT (U/E)
|
 |
The PANKAJ CPM is designed for upper extremities
(Elbow ), to stimulate the healing of cartilage in
addition to the reduction of post operative swelling & pain. The solid state circuitry control panel
with highly visual LED digital readouts, allows the
Flexing & Extending an Elbow joint through a pre-fixed range of Motion & Time. Wrist rotation and
Wrist roll movement can also be achieved. Unit is
fitted on mobile Electrical Jack to adjust height
according to patient's requirement. The necessary
limb supports provide a comfortable surface for
prolonged contact. Comes with necessary accessories
for Supination & Pronation, Wrist Roll and Elbow
passive motions.
[Request Quotation / More info...] |
SPECIFICATIONS:
-Flexion Angles: Adjustable from 0 - 160 degree & displayed by Bargraph.
-Inching: Flexion or Extension Starting position can be set by switches.
-Timer: Digitally displayed, 0 - 99 minuts.
-Height Adjustment: Electrically, by Push button switches.
-Right or Left arm can be exercised by little adjustments.
-Safety: Patient hand held safety switch. |
|
| IMI- 2734 AKAY TRACTION PACKAGE, DUO (Cervical/Lumber)
|
 |
Microprocessor controlled unit with "Eight Traction Modes" is suitable for LUMBER-CUM-CERVICAL TRACTION. The control unit is based on solid state circuitry and Panel has highly visual LED digital readouts. Package comes with One Three section, fixed Height painted Bed with storage cabin underneath & Cervical Traction Pole.
|
SPECIFICATIONS:
*Therapy Modes : EIGHT Traction Modes for either Lumber or Cervical Traction,
in Progressive, Regressive, Intermittent & Static modes etc.
*Memory/Programs:30 treatment Patterns can be programmed & stored in non-
volatile memory.(24 Programs are feeded and Six programs are Free).
* Traction Force : Adjustable from 5 kg to 60 kg.
*Speed: Fixed single speed.
* Base Force: Adjustable from 0 kg to 54 kg.
* Traction Hold Time : Adjustable from 0 to 99 Sec
* Base Traction Hold Time: Adjustable from 0 to 99 Sec
* Treatment Time : Continuously adjustable from 0 to 99 minutes, with acoustic signal & automatic reduction of traction force at the end.
* Displays: Digital display of Traction Force, Base Force, Traction Force Hold Time, Base Force Hold Time, Treatment Time & Graphical Display of Traction Mode
* Couch/Bed : Fixed Height-70mm,foam padded top is divided in Three sections. Head section has an adjustable incline
* Traction Pole : Pole with Two adjustable pulleys & rope for giving Cervical Traction in sitting position.
* Accessories : Adjustable Flexion Stool, Head-Halter, Pelvic & Thoracic Belts.
* Auto-Tension : The set traction force is-adjustment. Automatically maintained throughout the operation.
* Auto-Tension : The set traction force is-adjustment. Automatically maintained throughout the operation.
* Patient Safety : Patient Stop, hand held switch.
* Power Supply : 220-240 V AC.(recomended to use stabilizer). |
|
| IMI2732 AKAY TRACTION SYSTEM (Cervical)
|
 |
Microprocessor controlled, floor model, unit for INTERMITTENT/CONSTANT CERVICAL TRACTION, designed for high efficiency and life long performance. The control unit is based on solid state circuitry and Panel has highly visual LED digital readouts. |
SPECIFICATIONS:
*Traction Force : Variable from 4 kg to 60 kg.
* Therapy Modes : EIGHT traction modes, Static, Intermittent, Progressive & Regressive etc..
* Hold Time (Traction) : Variable from 0 to 99 Sec.
* Rest Time (Traction) : Variable from 0 to 99 Sec.
* Treatment Time : Variable from 1 to 99 minutes, with acoustic signal & automatic reduction of traction force.
* Display : Digital display of Traction Forces, Times, Modes & Graphical bar & Program number.
* Accessories : Head Halter, spreader bar & main lead.
NOTE: CHAIR IS NOT SUPPLIED WITH OR PART OF THE UNIT |
Treatment Equipments 
